Even resin thickness
Neither too thick nor too thin: resin of even thickness gives the best-looking part.
In short
The resin is injected hot, then cools and shrinks slightly. A very thick area shrinks more than the rest; a very thin wall is hard to fill.
Why it matters
A massive area can sink at the surface (a sink mark) and takes longer to cool. A wall that is too thin can stay incomplete or fragile.
What you can do
- Hollow out massive areas, following the shape of the components.
- Thicken the thinnest walls.
- Move smoothly from one thickness to another, with no abrupt step.